Hardware requirements:
I assume that you have the necessary equipment, as I said in my previous article on "How can the device showing in English tv available in Europe."
You will need:
A television set (one preferably with a SCART socket), an ex-rental Sky Digibox that has already been used in UKA bowl with the appropriate size (see my earlier article and astra2d.com for a size guide) with LNBCo-ax cableA Sky Ad DVB-T card or cardNecessary fortifications onMount the antenna assembly of the shell
The satellite we are looking for is Astra 2D 28.2E. This is located at 28.2 degrees East. Let me tell you why the establishment of the angle and the height is very important and needs to be done very carefully. Astra 2D is in a geostationary orbit, that is, it seems to stand still when viewed from the rotating earth .. The normal height for a geostationary satellite is 36,000 kilometers and the satellite is only 8 feet high and just over Diameter of 2 meters, it actually looks like a can of beans with the lid open! So the orientation of the antenna must be very carefully carried out.
I can not help you too much with the exact angle you need, how they vary by location. Here in the Southern Alps, French is a compass bearing of 150 degrees with an elevation of 34 degrees, the figures are needed. In Bucharest in Romania a bearing of 177 degrees and an altitude of 39 degrees would be required. Looking at the> Internet, especially on the ex-pat web sites for your region, usually show the magic numbers.
To mount your dish, if you will, it should not be on the roof, since they do not work like an antenna. It only takes a clear path between it and the satellite, no trees or buildings. The steepness of the angle of surprises a lot of people in the kind of dish where the LNB is supported on an arm attached to the bottom of the dish, the 'beam' angle we areInterest is approximately parallel to the arm. Set the height to the correct value and leave the bracket slightly loose so that you can turn the bowl from side to side. With the help of a compass, point the dish at a compass bearing to (150) in my case. You will not right the first time, but the closer you are, are the less danger of finding the wrong satellite.
Get them all working
Now close the vessel on a field in the fieldTV and switch on the power.
Warning: The dish cable carries a small electrical current, so that he would never come in contact or separated, while the live-box, otherwise some of the electronic components can be damaged
Do not worry if the remote control does not react immediately - after switching on the Digibox can be a few seconds before being acted on. On the remote press Services, then press 4, then 6 It seems a signal test screen.Ignore the signal strength and signal quality bars for the moment. They should, however, something in the signal strength. (If you do not have) a bad connection on the way to the LNB.
Place the TV where you can see, while moving the manipulation of the bowl, the bowl, until the zeroes) Amendment 0002 (Network ID) and 07d4 (Transport Stream. The change will suddenly go so carefully avoided, swinging the dish too far. The Lock Indicator will alsoChange from "Not locked" on "OK". The value of 07d4 is the case in general, but you may encounter others, especially if you try to get a signal in southern Europe. But the network ID must be 0002, otherwise appears in the wrong satellite.
Finishing the setup
Once the Network ID and Transport Stream values change from zero, a digital signal is received. Clamp the dish, then press the backup button on theRemote 3 times to return to normal display. Now wait until the field is always completed the program data.
If after aligning the antenna, you get a signal, but there are disturbances in sound or vision, it is almost certain by the shell height or cause the direction slightly off the track. Move the dish very slightly and carefully and watch the signal quality bar on the screen "test signal for the largest value. Everything should run for approximately 50%good reception.
0 ความคิดเห็น:
แสดงความคิดเห็น